The 30th anniversary
Opportunity
Apply for it!
Literature
Read & Download
Images & motion, better than words
Play Our Videos


EID, S.A.
Share capital €11.000.000,00
Registered under nr. 501 400 699



Last update: 14/05/2013

AP-525V 50W VHF Power Amplifier

AP-525V 50W VHF Power Amplifier
AP-525V 50W VHF Power Amplifier

The AP-525V VHF Power Amplifier, easily assembled into the rear of the MT-525 radio docking stations, boosts the output power of the PRC-525 combat net radio to 50W over the 30-108 MHz frequency range, therefore extending the communication range of the radio.

With a very compact design, the AP-525V is a linear amplifier fully compatible with EID's PRC-525 (and also with M3TR, the Rohde & Schwarz brand for this radio) VHF modulations and waveforms, like fast frequency hopping, OFDM (72 kbps) and analogue and digital fixed frequency.

A range of power levels can be selected on the companion radio. Continuous monitoring of the amplifier most relevant operating parameters is available, any anomalies being shown on the radio display. The AP-525V provides separate output connectors for HF, VHF and UHF bands, also enabling operation with external HF and UHF power amplifiers, whenever frequencies within these frequency ranges are selected on the radio.

Full protection is provided against adverse situations, such as antenna open and short circuits. An optional, fast hopping capable Cosite Filter can be fitted in the amplifier housing, providing excellent co-location characteristics and thus allowing simultaneous transmission and reception on a vehicle, with closely located antennas, without noticeable reduction of performance.

 

Technical information

General      
Frequency Range      
50W Amplifier     30-108 MHz TX/RX
HF bypass     1.5-30 MHz TX/RX
UHF bypass     108-512 MHz TX/RX
Cosite Filter range     30-90 MHz
Modulations     Supports all PRC-525 and R&S M3TR modulations
Waveforms     Supports all VHF PRC-525 and R&S M3TR waveforms
Built-In Test (BITE)     Power-up BIT, continuous monitoring
Power Supply     14 to 30 VDC
      19 to 29 VDC (full specs)
Consumption     ≤ 13 A @ 24 VDC
       
Receiving Path     30-108 MHz
with cosite filter     Gain ≥ 0 dB
without Cosite Filter     Gain ≥ 3 dB
       
Transmitting Path     30-108 MHz
RF Power Output     50W, 20W, 10W, 5W, 2W and 1W, CW or PEP
Harmonic Levels     < 60 dBc into 50Ω
Intermodulation     > 36 dB referred to PEP
       
Environmental     MIL-STD-810E
Temperature     -40 ºC to +70 ºC (operating)
      -25 ºC to +55 ºC (full specs)
Vibration     method 514.4 (assembled in a docking station)
Shock     method 516.4 (assembled in a docking station)
Leakage     EN 60529 IPX5
       
EMC     MIL-STD-461E (assembled in a docking station)
      CE102, CE106, CS101,CS103, CS104, CS105
Mechanical      
Dimensions (W x H x D)     290 x 101 x 140 mm
Weight     4.2 Kg


Related Documents




Return to main page

For more information please contact us