Literature
Read & Download
Images & motion, better than words
Play Our Videos


EID, S.A.
Share capital €11.000.000,00
Registered under nr. 501 400 699



Last update: 14/05/2012

SA-525-20 Antenna Tuning Unit

SA-525-20 Antenna Tuning Unit
SA-525-20 Antenna Tuning Unit

The SA-525-20 HF Antenna Tuning Unit features automatic matching of electrically short HF antennas, as usually found in vehicular applications, for up to 20W RF power with frequency hopping compatibility. A very compact and cost effective communications system with 20W HF and 50W VHF power capability can be easily built with a PRC-525 H/VHF radio, an AP-525V 50W VHF power amplifier, both mounted on a MT-525S single docking station, and one SA-525-20 ATU.

The SA-525-20 offers two modes of operation: active tuning mode, where the unit generates the RF signal, optimizes VSWR and stores the tuning parameters; and silent tuning mode in which pre-stored parameters are used. The tuning process is remotely controlled via coaxial or optical interfaces. The unit was designed to integrate battery powered systems, having a reduced power consumption and automatic switch off under radio control.

 

Technical information

General      
Frequency Range     1.5 to 30 MHz
Maximum Power Input     25 W PEP, CW
Power Supply     MIL-STD-1275B
Matched Antennas     Whip antenna ≥3 m
      Long-wire and broadband antennas ≤15 m
Tuning Modes     Active and silent tuning
Built-In Test     Continuous monitoring of RF level, temperature, supply voltage, etc.
       
Environmental     MIL-STD-810F
Temperature range     -40 ºC to +70 ºC (operating)
      -25 ºC to +55 ºC (full specs)
Vibration     method 514.5
Shock     method 516.5
Immersion     method 512.4
       
EMC     MIL-STD-461E
      CE102, CE106, CS101, CS114, RE102, RS103
Mechanical      
Dimensions (W x H x D)     147 x  72 x  225  mm
Weight     2 Kg


Related Documents




Return to main page

For more information please contact us